Steel fabrication Abu Dhabi: services, zones and 2026 rates
Steel fabrication in Abu Dhabi covers structural steel, PEB frames, platforms, pipe racks and mezzanines, and in 2026 fabricated and erected structural steel runs from about 4,500 to 7,500 AED per ton. Here is what the work includes, which zones we cover, and what actually drives the price.
Why work with APEX STEEL WORKS L.L.C
- UAE-wide coverage, from Abu Dhabi and Musaffah to Dubai and the Northern Emirates
- One workshop for structural steel, stainless steel (SS), GI welding and lathe work
- Google rating of 5 from 32 customer reviews
- Fixed-price quotations issued before any cutting starts
- Steel fabrication and site erection handled by the same team
- Direct contact on WhatsApp and phone at +971522709796
What steel fabrication in Abu Dhabi covers for industrial and commercial clients
We fabricate and install the steel that carries load, spans openings and supports equipment. Most enquiries fall into six groups.
- Structural steel: columns, beams, bracing and roof framing for warehouses and factories
- PEB frames: tapered built-up sections, purlins and sheeting rails
- Access platforms and staircases: checkered plate flooring, handrails, caged ladders and grating
- Pipe racks and supports: pipe bridges, sleepers, hangers and equipment skids
- Mezzanines: free-standing or rack-supported floors inside an existing unit
- Stainless steel and GI works: balustrades, kitchen frames, cladding supports and galvanised brackets
A typical Abu Dhabi enquiry is a 20 ton platform package or a 300 m2 mezzanine inside a live industrial unit. Both need a stamped drawing, a welding procedure and a delivery date that fits the fit-out programme. The full scope sits on our steel fabrication and structural steel services page.
Bronze and stainless detail work fixed on site. Frame alignment and concealed fixings are checked before handover.
Abu Dhabi industrial zones we serve
We work across the UAE, and the zone you build in changes lead time more than anything else.
| Zone | Typical projects | Logistics note |
|---|---|---|
| Musaffah | Workshop extensions, mezzanines, racking platforms | Closest to our supply chain, small jobs often move in 2 weeks |
| ICAD | Process supports, pipe racks, equipment skids | Easy crane access, site inductions can add 2 to 4 days |
| KEZAD | Warehouse frames, PEB buildings, cold store steel | Port-side steel import, stricter documents and gate passes |
| Al Dhafra | Remote sheds, boundary gates, tank skirts | Longest haul, plan a full day per delivery |
A 300 m2 mezzanine in Musaffah can be fabricated, delivered and bolted in under three weeks. The same job in Al Dhafra usually adds a week of transport and crew accommodation, and that shows up in the quote.
Fabrication standards and approvals in Abu Dhabi
Three layers apply to steel work in Abu Dhabi: trade licence, product conformity and site safety. A fabricator who cannot produce all three will slow your programme down.
- ADDED licence: a valid industrial licence from the Abu Dhabi Department of Economic Development for fabrication and metal works
- ADQCC conformity: assessment may be required for structural and fire rated elements supplied into the emirate
- OSHAD: HSE registration, an approved plan and hot work permits before mobilisation
- Welding certification: welders qualified to EN 1090 or AWS D1.1, with WPS and WPQR documents per joint type
- ADNOC supply chain: pre-qualification, AVL listing and third party inspection for packages feeding refinery or gas sites
- Handover pack: material test certificates to EN 10204 3.1, weld maps, dimensional reports and NDT results
Steel fabrication cost in Abu Dhabi 2026
Prices below are for 2026 and exclude VAT. They track the steel mill index, so treat them as bands rather than fixed rates.
- Structural steel, fabricated and erected: 4,500 to 7,500 AED per ton
- Mezzanine floors, supply and install: 1,800 to 2,600 AED per m2
- Hot dip galvanising: 1,000 to 1,300 AED per ton
- Blasting and painting: 120 to 250 AED per m2
- Stainless steel handrails and balustrades: 450 to 950 AED per linear metre
Worked example. A 300 m2 mezzanine in a Musaffah unit, 21 tons of steel, checkered plate decking, primer and site erection. At 2,150 AED per m2 the base price is 645,000 AED. Galvanising at 1,150 AED per ton adds about 24,000 AED, so the job lands near 669,000 AED. Swap the decking for grating and add a staircase, and budget 780,000 AED or more.
What moves the price: the mill index, galvanising, CNC and plasma cutting, hot work permits on live plants, craneage, and shop drawings or connection design. Rates shift between emirates too, so read our more UAE steel fabrication guides, including structural steel works Dubai and warehouse steel structure Dubai.
Brushed stainless steel door frames and hardware. Stainless work is priced by profile type, finish grade and hardware count.
Build times and delivery
Small jobs run 2 to 3 weeks. Structural packages run 6 to 10 weeks from approved drawings to handover.
- Site visit and measurement, including access, power and lifting points
- Fixed quotation with tonnage, rate, exclusions and a delivery window
- Shop drawings issued for approval, with connection details
- Fabrication in the workshop, with welding and dimensional checks recorded
- Surface treatment, either painting or hot dip galvanising at an approved plant
- Factory acceptance with you, then delivery, erection, bolt-up and final inspection
Factory acceptance matters on Abu Dhabi projects. Sign off the steel in the workshop and the site visit becomes a bolting exercise rather than a rework exercise.
How to pick a steel fabricator in Abu Dhabi
Check four things before you sign: shop capacity, finishing, documentation and safety record.
- Shop capacity: monthly tonnage, cutting and drilling equipment, and whether plasma cutting and plate rolling are in-house
- Finishing: in-house blasting and a fixed galvanising partner keep surface treatment inside the programme
- QA dossier: ask for a past package with material certificates, weld maps and NDT reports
- HSE record: OSHAD registration, risk assessments and safety statistics you can actually read
- References: two similar projects in the same zone, then visit one of them
Our completed industrial steel fabrication projects show tonnage, zone and scope, which is faster than trading PDFs. To start, request a steel fabrication quote in Abu Dhabi with your drawings.
They are very professional, knowledgeable, and pay attention to even the smallest details. alhaf malik, 5/5
That client needed stainless steel works, GI welding and lathe work in one scope, which is where a single workshop beats three subcontractors.
The quality was great, and the price was one of the best I found. Romosh Al Eyoun, 5/5
Our Google rating sits at 5 from 32 reviews.
Frequently asked questions
How much does steel fabrication cost in Abu Dhabi in 2026?
Structural steel fabricated and erected costs 4,500 to 7,500 AED per ton, and mezzanine floors run 1,800 to 2,600 AED per m2. A 300 m2 mezzanine in Musaffah typically lands between 600,000 and 750,000 AED including decking and erection. Galvanising, grating, staircases and craneage sit outside the per m2 rate.
Do I need an ADDED licence and ADQCC approval for steel work in Abu Dhabi?
Yes. Steel fabrication and installation in Abu Dhabi needs an ADDED industrial licence, and structural or fire rated elements may need ADQCC conformity assessment. Site work also requires OSHAD registration, an approved HSE plan and hot work permits. Ask for copies before you award the job.
How long does steel fabrication take in Abu Dhabi?
Gates, handrails and small brackets take 2 to 3 weeks. Structural steel, PEB and mezzanine packages take 6 to 10 weeks from approved drawings to handover. Add 2 to 4 weeks for ADNOC-linked scopes, because third party inspection adds hold points.
Do you fabricate and install steel in Musaffah and KEZAD?
Yes, we work across the UAE, including Musaffah, ICAD, KEZAD and Al Dhafra. Musaffah jobs move fastest because steel and consumables are close to the workshop. KEZAD and Al Dhafra need extra transport and gate pass planning, so build that into your programme.
Is galvanising included in a steel fabrication quote in Abu Dhabi?
Usually not. Galvanising is quoted per ton, typically 1,000 to 1,300 AED per ton, because it depends on the weight and thickness of the sections. Ask whether your quote includes blasting, primer, topcoat and touch up after erection.
