Steel Fabrication Ras Al Khaimah Costs and Services
Steel fabrication Ras Al Khaimah covers cutting, welding, coating and installing steel for factories, commercial units, villas and site works. APEX STEEL WORKS L.L.C is a steel fabrication company in the UAE with direct AED quotes and a single team for fabrication and installation.
Why work with APEX STEEL WORKS L.L.C
- Google rating 5 from 31 customer reviews
- Serving all UAE including Ras Al Khaimah
- Skilled and experienced fabrication team
- Direct phone and WhatsApp line at +971522709796
- Fixed written quotes in AED
- Work across RAK Economic Zone, Al Hamra and Al Ghail
Excellent works and very Proffesional team. Highly recommended.
Shahad Cb, 5 star Google review
Excellent service and very good work. The quality was great, and the price was one of the best I found. Highly recommended!
Romosh Al Eyoun, 5 star Google review
What steel fabrication services does APEX Steel Works provide in Ras Al Khaimah
We handle structural steel fabrication Ras Al Khaimah projects, architectural metalwork, stainless steel works and site installation as one team. Clients use us for factory structures, fit-out finishes and repair work.
- Structural steel fabrication for mezzanine floors, platforms, canopies and industrial support frames
- Metal fabrication Ras Al Khaimah for gates, railings, staircases, louvres, access hatches and brackets
- Stainless steel works for handrails, kitchen counters, trench drains, door frames and glass panel sets
- Site welding, grinding and installation for commercial fit-outs and light industrial units
steel fabrication fit-out in Ras Al Khaimah" loading="lazy" decoding="async" /> On-site measurement keeps custom metal and steel fabrication work precise during commercial interior fit-outs in RAK.
How much does steel fabrication cost in Ras Al Khaimah
Most small steel works in RAK cost between AED 450 and AED 900 per linear metre. Structural steel fabrication usually falls between AED 9 and AED 14 per kg based on the section, the weight and the coating.
A 6 metre mild steel gate with primer and basic installation in Al Hamra may cost around AED 2,700 to AED 5,400. The same gate in RAK Economic Zone may need extra access planning, but the material rate should not change much. For steel fabrication RAK pricing, material grade and finish matter more than location.
- Mild steel gate or railing: AED 450 to AED 900 per linear metre, excluding complex profiles or difficult access
- Structural steel beam and column work: AED 9 to AED 14 per kg, based on section size, weight and coating
- Stainless steel handrail: AED 350 to AED 750 per linear metre, with brushed or mirror finish changing the rate
- Site welding and installation: AED 350 to AED 600 per crew hour, including basic consumables and labour
For a wider UAE comparison, see our steel fabrication cost UAE 2026 guide.
Typical lead times for steel works in Ras Al Khaimah
Small items are usually finished in 5 to 10 working days. Structural steel fabrication Ras Al Khaimah jobs normally take 2 to 4 weeks after drawings are approved and material is confirmed.
A simple process looks like this:
- Site measurement and design approval in RAK
- Cutting, welding and assembly in the workshop
- Surface preparation, painting or galvanizing
- Delivery and installation in Al Hamra, Al Ghail or RAK Economic Zone
Frosted glass and stainless steel door sets are a common request for modern offices and showrooms in Ras Al Khaimah.
Local industrial zones we serve in Ras Al Khaimah
APEX covers steel work in RAK Economic Zone, Al Hamra and Al Ghail as part of our UAE-wide service. The job type changes slightly between these areas.
RAK Economic Zone
Factory units, warehouses and structural platforms often need heavier beams, fabrication drawings and timed site access.
Al Hamra
Villas and showrooms use more finished metalwork such as handrails, gates, stainless steel counters and glass panel door frames.
Al Ghail
Light industrial sheds and maintenance works tend to need fast repairs, supports and welded brackets.
How to choose a steel fabricator in Ras Al Khaimah
Choose a fabricator who gives written AED pricing, shows completed site work and uses an in-house team. Avoid quotes that do not state material grade, coating and installation responsibility.
Ask for shop drawings before cutting starts. Check whether the team handles site measurement, delivery and installation. Confirm coating type such as primer, powder coat or hot dip galvanizing. Ask if the fabricator will provide site welding and touch-up after installation. For structural jobs, ask for a cutting list and material certificates where needed.
For a fixed written quote for your site, request a free steel fabrication quote by phone or WhatsApp.
Frequently asked questions
How much does steel fabrication cost in Ras Al Khaimah?
Small mild steel gates and railings typically cost AED 450 to AED 900 per linear metre. Structural steel fabrication cost Ras Al Khaimah usually ranges from AED 9 to AED 14 per kg depending on section and coating. Stainless steel handrails can range from AED 350 to AED 750 per linear metre.
What is the typical lead time for structural steel fabrication in RAK?
Small items take around 5 to 10 working days after approval. Structural steel fabrication in RAK usually takes 2 to 4 weeks for heavier beams and platforms. Site access in RAK Economic Zone or Al Ghail can affect delivery and installation timing.
Do you handle both fabrication and installation in Ras Al Khaimah?
Yes. APEX STEEL WORKS L.L.C handles cutting, welding, coating and site installation across Ras Al Khaimah. This includes work in Al Hamra, Al Ghail and RAK Economic Zone.
Can you work from my own steel drawings or structural design?
Yes. We can fabricate from approved client drawings or prepare shop drawings where needed. The process starts with measurement, then material approval and fabrication.
Which materials and finishes are available for steel works Ras Al Khaimah?
We work with mild steel, stainless steel and galvanized finishes. Common coatings include primer, powder coating and hot dip galvanizing for outdoor or industrial steel works.
Which areas in Ras Al Khaimah do you serve?
We serve all UAE, including Ras Al Khaimah. Within RAK, our team covers RAK Economic Zone, Al Hamra and Al Ghail for site measurement, fabrication delivery and installation.
