Metal Fabrication Services Sharjah | APEX Steel Works
If you need metal fabrication services in Sharjah, APEX Steel Works L.L.C supplies structural steel, custom welding, staircases, mezzanine floors, gates and railings across the United Arab Emirates. We handle shop drawings, fabrication, finishing and site installation as one package.
Why work with APEX STEEL WORKS L.L.C
- UAE wide service coverage from Sharjah
- Google rating of 5 from 31 client reviews
- In-house steel fabrication and welding team
- Material and welding QA checks on every job
- Engineering approach to shop drawings and fit-up
- Direct WhatsApp contact on +971522709796
What metal fabrication services does a Sharjah contractor offer?
A full service metal workshop in Sharjah can take a project from site measurement through detailed drawings, fabrication and installation. We handle most commercial and residential steelwork through our metal fabrication services.
Structural steel and mezzanine floors
We fabricate beams, columns, platforms and mezzanine floors for warehouses, workshops and retail units. Work ranges from single replacement beams to full structural frames. We use S275JR and S355JR sections with bolted or welded connections as the engineer specifies.
Staircases, gates and railings
Standard and custom staircases, handrails, gates, fencing and balcony railings are common Sharjah requests. We form, weld and finish mild steel, stainless steel and aluminium. Finishes include primer, powder coating and hot dip galvanising.
Canopies and custom welding
We also produce car parking shades, entrance canopies, brackets and custom furniture frames. Site welding services in Sharjah cover repairs, roof supports, pipe supports and machinery bases.
Key materials and finishes we work with:
- Mild steel S275JR and S355JR
- Stainless steel 304 and 316
- Welding methods: SMAW, GTAW and GMAW
- Finishes: primer, powder coating, galvanising
metal fabrication services in Sharjah" loading="lazy" decoding="async" /> Custom fabricated chrome furniture bases from our metal fabrication services in Sharjah.
How much do metal fabrication services in Sharjah cost?
Prices depend on material weight, complexity, finish and access. We give a detailed line item quote after site measurements.
For a 60 square metre structural steel mezzanine in an SAIF Zone warehouse, standard S275 steel beams with checker plate decking and primer finish would cost around AED 22,800 for fabrication and material at AED 380 per square metre. Add roughly AED 6,000 for lifting, welding on site and installation, bringing the total to about AED 28,800. Galvanising or fire protection would add to this.
| Service | Typical price range | Typical lead time | | Steel gate and railing | AED 2,500 to AED 12,000 per job | 5 to 10 working days | | Structural steel mezzanine | AED 220 to AED 480 per sqm | 3 to 6 weeks | | Custom internal staircase | AED 8,000 to AED 35,000 | 2 to 5 weeks | | On site welding repair | AED 350 to AED 1,500 per visit | 1 to 3 days |
In free zones like Hamriyah Free Zone, projects may require extra documentation and work permits. In older Sharjah Industrial Area units, site access and crane positioning can affect install cost. For a wider breakdown, read our steel fabrication cost UAE guide.
How long does steel fabrication take in Sharjah?
Small gates and railings are usually delivered in 5 to 10 working days. Structural steel and mezzanine projects typically need 3 to 6 weeks because of drawings, approvals, material procurement and installation.
A typical job moves through:
- Site measurement and design brief.
- Shop drawings and client approval.
- Material procurement with mill test certificates.
- Cutting, drilling, welding and surface finishing.
- QA inspection, delivery and site installation.
For a firm date, request a free metal fabrication quote in Sharjah and send us your drawings or site address.
Sharjah industrial zones we cover
APEX Steel Works serves clients across the United Arab Emirates, including SAIF Zone, Hamriyah Free Zone and Sharjah Industrial Areas 1 to 18. Each zone has different access, loading and approval requirements.
In SAIF Zone, mezzanine projects often need structural drawings approved before installation. In Hamriyah Free Zone, we coordinate with factory managers for crane access and safety inductions. In Sharjah Industrial Area locations, older units sometimes need additional site surveys before fabrication.
We prepare shop drawings and material documentation early so free zone approvals do not delay the work.
How to choose a metal fabricator in Sharjah
Start with material certificates, welding qualifications, insurance and installed examples. A low price from an unqualified workshop often shows up later as poor fit-up, missed delivery dates or rejected work.
Ask for material and welding documentation
Ask for mill test certificates for S275JR or S355JR steel. Confirm welders work to qualified procedures and that dimensions are checked before painting or galvanising.
Check site references and finished work
Look at recent fabrication projects and installed examples near your site. Google rating is useful. APEX Steel Works holds a Google rating of 5 from 31 reviews.
"Excellent works and very Proffesional team. Highly recommended."
Shahad Cb, 5/5 Google review
"Excellent service and very good work. The quality was great, and the price was one of the best I found. Highly recommended!"
Romosh Al Eyoun, 5/5 Google review
Custom bronze mirror frame and cabinet trim from APEX Steel Works, a recent metal fabrication project in the UAE.
Ask about insurance and warranty on installation. For Sharjah sites, confirm whether the fabricator handles local authority approvals if applicable. Then compare line item quotes, not just the bottom line total.
Frequently asked questions
How much do metal fabrication services in Sharjah cost?
Small gate and railing jobs often cost AED 2,500 to AED 12,000. A structural steel mezzanine can range from AED 220 to AED 480 per square metre for standard S275 steel and checker plate. Final price depends on material thickness, finish and site access.
How long does steel fabrication take in Sharjah?
Small items like gates and frames usually take 5 to 10 working days. Larger structural steel or mezzanine jobs typically need 3 to 6 weeks including drawings, fabrication, painting and installation.
Do you provide welding services for commercial buildings in Sharjah?
Yes. We handle on site welding repairs and fabrication for shops, warehouses and commercial units in areas like SAIF Zone and Hamriyah Free Zone. Small repairs can be completed within one to three days.
Can you do custom metal staircases in Sharjah?
Yes. We fabricate and install straight, spiral and access staircases. A standard internal steel staircase in a Sharjah villa can range from AED 8,000 to AED 35,000 depending on width, landing and railing design.
Which material certificates do you provide?
We arrange mill test certificates for structural steel grades such as S275JR and S355JR. Welders work to qualified procedures and we check dimensions before painting or galvanising. Documentation can be shared with project consultants before installation.
Do you supply metalwork to free zones in Sharjah?
Yes. We work with clients in SAIF Zone, Hamriyah Free Zone and Sharjah Industrial Areas 1 to 18. Free zone projects sometimes need shop drawings for NOC approval, so we prepare those early.
